It’s a bit trickier last time I did it to be confident I can rip a Blu-Ray.
I actually don’t want to juggle discs to watch stuff, I like the general concept of streaming, but I don’t like paying eternally for it, for shows to jump between providers and for my access to cut out part way through and/or even if I have the new service, my progress being forgotten so I have to try to look for where I left off.
So I want to rip content. DVDs are always dead simple. As I rip blu-rays, MakeMKV is kind of a hassle, it wants to expire itself all the time, and like right this second the place to update from seems down. Maybe someone will comment with some easy way to rip blu ray that internet search doesn’t make obvious.
If folks sway me, might go buy a 4k friendly Blu Ray drive and hop to it.
DVD is perfectly fine resolution, not everyone even has a 4K screen or TV. Most people still have 720x1080 or 1080x1920p screens or TVs. Our tv personally is 720x1080 and it looks just fine.
That’s a 15 year old TV at least and of course you don’t see a difference on that.
My 4k is at least 6 years old.
If I bought one now I would not be able to buy lower res.
DVD is pal or ntsc and if you played that on a monitor the picture is as small as phone. It’s like the lowest SVGA res
I found out the hard way that 4k Blu-ray need a special player. That it won’t work on Ps2/PS3/PS4 I already have. Only "regular blue-ray play on those.
People did have problems, there just wasn’t an (affordable) alternative. If you would go back to the 70/80’s and offered anyone the choice between 480p and 1080p, all else being equal. Would anyone pick 480? I know I wouldn’t
It’s not because we learned to live with it or didn’t know better, that it was the best option.
I lived through the 70s and 80s. Didn’t know what 480p even was til the 90s, so I have direct experience with CRT usage. Bonus: we didn’t even have a color TV til the mid 80s at my house
Because you didn’t know it was called 480p or knew of better options doesn’t mean you can’t see that it wasn’t great or improvable. You knew colour existed before getting a colour, TV so you knew it could be better…
Oh boy, they weren’t fuzzy. Some film outclass the clarity and sharpness of modern OLED, even when it was for B category low budget movies, just that most people watched a 4 week old piece of film in bumfuck middle of nowhere cinema. With a scratched up and badly calibrated focus lens and dirty and deteriorated film over a dirty screen.
Anyways, the biggest problem that physical media solves is not the number of pixels, but the bitrate. Tons of information, specially about color, is lost to streaming compression. Pixel density equation means that the quality of what you see is rarely distinguishable between 1080p, 2k and 4k, depending on how far away you sit from the screen and how big it is. For the typical seating accommodation at home and commercial theaters, you won’t notice a significant change within FHD and UHD. However, you can definitely tell the difference between the 10Mbps (down to as little as 2Mbps if your connection sucks) 4k that you get from Netflix and the steady 32Mbps that Blu-ray can give you.
Many old movies that are restored perfectly.
Yes it’s a lot of film grain but you can also see a lot in the background etc.
Also id rather have the film grain.
The movies where shot for cinema on 16mm or so and that is pretty high res.
Its Blu-ray not DVD right? DVD was an impossibly low resolution, that really isn’t fun to watch today.
Blu ray works perfectly on today’s hardware
It’s a bit trickier last time I did it to be confident I can rip a Blu-Ray.
I actually don’t want to juggle discs to watch stuff, I like the general concept of streaming, but I don’t like paying eternally for it, for shows to jump between providers and for my access to cut out part way through and/or even if I have the new service, my progress being forgotten so I have to try to look for where I left off.
So I want to rip content. DVDs are always dead simple. As I rip blu-rays, MakeMKV is kind of a hassle, it wants to expire itself all the time, and like right this second the place to update from seems down. Maybe someone will comment with some easy way to rip blu ray that internet search doesn’t make obvious.
If folks sway me, might go buy a 4k friendly Blu Ray drive and hop to it.
MakeMKV is the easiest way. The license key is always in the forum.
DVD is perfectly fine resolution, not everyone even has a 4K screen or TV. Most people still have 720x1080 or 1080x1920p screens or TVs. Our tv personally is 720x1080 and it looks just fine.
That’s a 15 year old TV at least and of course you don’t see a difference on that. My 4k is at least 6 years old. If I bought one now I would not be able to buy lower res.
DVD is pal or ntsc and if you played that on a monitor the picture is as small as phone. It’s like the lowest SVGA res
I found out the hard way that 4k Blu-ray need a special player. That it won’t work on Ps2/PS3/PS4 I already have. Only "regular blue-ray play on those.
Yeah, you need a PS5 to play ultras. But what’s even dumber is neither 4 nor 5 can play regular old music CDs
Heck CRTs were standard at 480p and nobody had any problems
People did have problems, there just wasn’t an (affordable) alternative. If you would go back to the 70/80’s and offered anyone the choice between 480p and 1080p, all else being equal. Would anyone pick 480? I know I wouldn’t
It’s not because we learned to live with it or didn’t know better, that it was the best option.
I lived through the 70s and 80s. Didn’t know what 480p even was til the 90s, so I have direct experience with CRT usage. Bonus: we didn’t even have a color TV til the mid 80s at my house
Because you didn’t know it was called 480p or knew of better options doesn’t mean you can’t see that it wasn’t great or improvable. You knew colour existed before getting a colour, TV so you knew it could be better…
People had 56k modems and no one had any problems, my Gameboy was monochrome and you saw nothing in the sun, no problems there either…
What? DVD is perfectly fine. I dont even have a 4K TV
It’s a little fuzzy, but that’s OK on a lot of older movies (especially lower budget ones) because they were always a little fuzzy to start with.
You can have all the pixels you want, but you’re not going to get a lot of extra detail out of Critters or Masters of the Universe.
Oh boy, they weren’t fuzzy. Some film outclass the clarity and sharpness of modern OLED, even when it was for B category low budget movies, just that most people watched a 4 week old piece of film in bumfuck middle of nowhere cinema. With a scratched up and badly calibrated focus lens and dirty and deteriorated film over a dirty screen.
Anyways, the biggest problem that physical media solves is not the number of pixels, but the bitrate. Tons of information, specially about color, is lost to streaming compression. Pixel density equation means that the quality of what you see is rarely distinguishable between 1080p, 2k and 4k, depending on how far away you sit from the screen and how big it is. For the typical seating accommodation at home and commercial theaters, you won’t notice a significant change within FHD and UHD. However, you can definitely tell the difference between the 10Mbps (down to as little as 2Mbps if your connection sucks) 4k that you get from Netflix and the steady 32Mbps that Blu-ray can give you.
Many old movies that are restored perfectly. Yes it’s a lot of film grain but you can also see a lot in the background etc. Also id rather have the film grain.
The movies where shot for cinema on 16mm or so and that is pretty high res.